Independent sourcing partner for test instruments
When a buyer searches insulation tester for sale, the useful next step is a brief, not a shelf photo. LinkScope Sourcing 58 collects the test voltage, the resistance window, the safety category, the quantity, and the US destination, then asks factories to quote that same line. The desk does not hold stock and does not speak as the instrument maker.
A handheld megohmmeter and a 5 kV diagnostic set can share the search phrase and still differ by an order of magnitude in output voltage. Write the voltage steps you will actually select, such as 250 V, 500 V, and 1000 V, or say the higher 2500 V and 5000 V positions are mandatory. Ask whether the test source short-circuit current is the 1 mA figure associated with IEC 61557-2, or a 2 mA figure printed on that datasheet.
Timed readings change the quote too. A spot check at 60 seconds is a different procedure from a polarization index that divides the 10 minute reading by the 1 minute reading. Dielectric absorption ratio, using the 60 second and 30 second values, belongs on its own line if the maintenance sheet requires it. Measurement accuracy should be requested as a percent of reading plus digits at a named voltage, for example plus or minus 3 percent plus 2 digits at 500 V, rather than a single marketing word.
Request Factory Quotes Review inquiry names
These cards are questions for the supplier. They are not credentials of this desk. A supplier ISO 9001 file, an NRTL mark, or an FCC authorization applies only when the proposed model file shows it, and many insulation meters sit outside radio authorization entirely.
List each selectable step, from 50 V and 100 V up through 250 V, 500 V, and 1000 V when those are the plant limits. State the short-circuit current the procedure expects, often 1 mA, and whether a guard terminal is included to reduce surface leakage on dusty bushings.
Ask for the resistance window, such as 0.01 megohm to 200 gigohm, or a 10 teraohm upper limit if the sheet claims it. A 6000 count display is a count, not a proof of measurement accuracy. Timed modes at 30 seconds, 60 seconds, and 10 minutes should be priced as functions, not assumed.
Request the IEC 61010-1 category printed for the exact model, such as CAT III 600 V or CAT IV 300 V. Lead insulation, fuse arrangement, and connector mating cycle notes belong with the meter. A lower instrument price with unrated leads is a different commercial scope.
Ask for the certificate interval, the serial link, and the lab identity. A 12 month certificate is a purchasing choice, not a default of this website. Calibration traceability is evidence tied to one serial number. A family brochure does not replace it.
Checks feeder insulation on rectifiers and HVAC motors inside a telecom hut. The brief names the highest test voltage the procedure allows on that winding, often 500 V or 1000 V, plus the ambient band, commonly 0 C to 40 C, and whether ingress protection such as IP54 is required for the case.
Compares unit price only after quantity, currency, Incoterm, freight, duties, leads, case, and calibration are on the same page. An optional target budget needs an amount or range, USD or another currency, and a per-unit or whole-order basis. No existing quote is required to state that budget.
May want a logged result rather than a screen glance. Split the meter, the interface cable, and any logging license. Impedance of a companion multimeter is a different specification and should not be blended into the insulation line. Frequency range on an AC voltage function is likewise a separate row.
Looking toward a pv insulation tester will ask 1000 V DC versus 1500 V DC, polarity, and whether the meter is safe on an array that can still be energized. That choice is expanded on the RFQ planner. This home page only flags that a string task is not the same as a motor spot check.
A new unit can make the calibration date and the lead condition easier to describe. A refurbished unit can answer a discontinued procedure when the seller states remaining support months, fuse condition, and whether the leads are original. Quote both only if you want both. The two offers are not the same scope until those lines match. A high-end, mid-range, budget, or undecided preference is your cost note, not a grade this desk has verified.
Original leads may track a written procedure and a maker support note. A compatible set may widen the factory list when voltage rating, insulation, and connector fit are written on the quote. A shared photo of a red lead is not that match. VSWR, return loss, wavelength, and optical budget belong to other instruments and should stay off this request so the price stays about insulation resistance.
Equipment under test, maximum allowed test voltage, resistance acceptance if you have one, quantity, destination, and requested timing. Mark unknown lines as open so every factory answers them instead of guessing. IEEE 802 and 47 CFR Part 2 can frame network context. They do not certify a megohmmeter.
You send the brief. The desk asks factories for quotes on that configuration and returns the named model, exclusions, and evidence list. Stock, measurement accuracy, and a delivered price are supplier statements. This site does not convert them into its own claims. See the price checklist when several functions share one housing.
When each function is listed. Continuity at a low resistance is not an insulation test. Polarization index and dielectric absorption ratio need timed readings. If a function is optional, ask for it as a separate price so a missing timer does not hide inside a blended figure.
Current datasheet revision, safety category, calibration traceability for the serials you will receive, and accessory list. Do not treat a catalog family as proof of the unit in the box. Incoming inspection can confirm voltage steps and a known resistor check if your procedure already defines one.
There is no file upload on this form. Put specification, quantity, destination, and timing in the procurement text. Drawings or an older quote can follow after the desk replies to the work email you provide. The same form sits in the product dialog, in a narrow window. This panel is the page-level handoff.
Qualified briefs can include sourcing support of up to 3%.
Eligibility applies to qualified business buyers and is confirmed after we review your product, quantity, destination, and sourcing requirements.
Prepare a Telecom RFQ